Hard Drive Volume Not Accessible Error: Reasons and Fixing Solutions!

“A hard drive not detected” is a common error message experienced by users. It can appear while system setup or booting up windows.

Same as this, the non-accessible hard drive volume error troubles the users. And in this situation, data recovery services providers help users. They can recover your data where there is a problem of hard drive access denied. Also, experts suggest some ways for users to protect their device from non-accessible hard drive volume errors. 

Have you received this error? In this write-up, we have mentioned some causes and fixes for solving those. 

What Are The Reasons For Non Accessible Hard Drives?  

1. Corrupted Hard Drive

Sometimes, the hard drive is corrupted logically. For example, the file system might stop functioning when the drive’s partition table, partition superblock, or boot sector becomes corrupt. In such cases, the drive appears blank in the Windows file explorer. Also, it may prompt Windows and ask to change the drive letter, create a new volume, or format the drive while plugging in. For a corrupted hard drive, users often visit the data recovery services or professionals. They will work with expertise to restore the corrupted or lost data. 

2. Poorly Connected Cables

Do you know that often users don’t check the right connection of cables and look for various data recovery software or services? However, the hard drive shows a non-accessible error because of a loose or poor data cable.  So, before visiting any expert, try to change the cable and set them properly. There are chances that the error is because of a faulty connection. 

3. Broken Hard Drive

Sometimes a hard drive shows errors due to its physical components. They have complex and sensitive parts which allow the hard drive to run properly. And manufacturers build these parts for high usage. However, device parts can get defective with time or due to factory defects. Moreover, with a broken hard drive, users see error messages in their system. 

Also Read: Should You Repair Or Replace Your Defective Smartphone?

Best Ways For Fixing No Accessible Volume Issue

Method 1: Run CHKDSK

CHKDSK is a command-line tool used to repair and analyze the drive for errors. The corrupt file system is a common reason for the non-accessible hard drive volume issues. This problem can be solved by running the CHKDSK command.

For running the CHKDSK command, follow the instructions:

• Go to the search box and enter CHKDSK and tap the Enter key.
• Then, in the Command Prompt window, enter CHKDSK E: / f / r.

/ r locate repairs readable information and bad segments. Well, E is for volume pathname, and / f is for Fixes errors on the disk

The CHKDSK command is useful in modifying the table allocation, so there are chances you might lose your important files. Therefore, make sure there must be a data backup before running the command.

Method 2: System File Checker tool

With a corrupt file system, users might face many problems with a hard drive. To solve it, run the inbuilt Windows utility, which means the System File Checker tool. This helps to view the corrupted data and restores those files. 

If you want to run the tool, follow the steps given below:

• First, go to the Windows icon in the search box, enter Command Prompt, and tap the Enter key.
• Write command: ‘sfc / scannow’.
• When the command finds errors, it helps to replace the corrupted files with a cached copy in the compressed folder at %WinDir%\System32\Dllcache.

Method 3: Latest Windows update install  

As you know, Microsoft releases updates for Windows within time. Also, it is best to fix various bugs and enhance the overall performance. And if you delay these updates, it will lead to many problems with a hard drive. So, make sure to install the latest updates in Windows.

Follow the steps given below:

• First, go to the Windows icon, and in the search box, use the keyboard to type in check to see updates.
• Now, choose Windows Updates, then in the checkbox, mark the “check for updates.”
• You can install it if there are any updates available.
• Once you have installed all the updates,  restart your laptop or computer.

Method 4: Get file or folder ownership

If you don’t have ownership rights, then you can’t access the file or folder. Follow the steps to get access. 

• First, right-click on the file or folder you need to access 
• Go to the Properties option.
• Tap Security and then Advanced.
• Now, click on the Change button.
• For confirmation, the device will ask to enter the Administrator password. 
• Type the name of the user you want to grant ownership to
• Click on Check Names and then click on OK.
• In the end, save all the changes and access the file or folder.

Conclusion 

There are many reasons that cause hard drive volume, not accessible problems. And we hope this article has given you some tips on solving this issue. Following the steps listed above will help to access your important data or file. Still, if you are not confident enough, then hard disk data recovery in Singapore can assist you. With expert guidance, your hard drive will become accessible.

Thank you for reading this article!